Home Shop About Us Contact Us
|
Electronics

Particle Xenon IoT Development Kit (Bluetooth, NFC, Mesh)

AED 199.00

Low stock
1

Description

The Particle Xenon is a cost-effective, mesh-enabled development board designed specifically for IoT applications. Powered by the Nordic nRF52840 SoC, it combines the performance of an ARM Cortex-M4 processor with advanced features like OpenThread mesh networking, Bluetooth 5, NFC, and multiple GPIOs. This makes the Xenon ideal for connected projects, whether used as a standalone endpoint or a repeater in a Particle Mesh network, offering a scalable solution for building IoT systems. Designed with the popular Feather form factor, the Xenon is compatible with Feather Shields, making it flexible for various project needs. It includes a JST connector for Li-Po batteries with integrated USB charging, making it suitable for portable applications. The board also features an RGB status LED, a JTAG (SWD) connector for debugging, and an onboard PCB antenna, ensuring reliable performance in mesh networks. This IoT development kit includes everything you need to get started: the Xenon development board, a mini breadboard, and essential components for a starter project. Additionally, it provides access to Particle's Device Cloud, offering features like over-the-air firmware updates, a simple REST API, and support for firmware development through both web and local IDEs.

 

Features

  • Processor: Nordic Semiconductor nRF52840 SoC
    • ARM Cortex-M4F 32-bit processor @ 64MHz
    • 1MB flash, 256KB RAM
  • Networking:
    • OpenThread mesh networking (IEEE 802.15.4)
    • Bluetooth 5 (2Mbps, 1Mbps, 500Kbps, 125Kbps)
    • NFC-A tag support
  • Security:
    • ARM TrustZone CryptoCell-310 Cryptographic and security module
    • DSP instructions and HW accelerated Floating Point Unit (FPU) calculations
  • I/O:
    • 20 mixed signal GPIOs (6x Analog, 8x PWM)
    • UART, I2C, SPI interfaces
  • Power:
    • Integrated Li-Po charging with JST connector
    • On-board additional 4MB SPI flash
  • Connectivity:
    • On-board PCB antenna for mesh network
    • u.FL connectors for external antennas (mesh network and NFC)
  • User Interface:
    • RGB status LED
    • Reset and Mode buttons
  • Certification: FCC, CE, IC certified, RoHS compliant
  • Physical Dimensions: Compatible with Feather footprint for Feather Shields

 

Specifications:

  • ARM Cortex-M4F 32-bit processor @64MHz
  • 1MB flash, 256KB RAM
  • IEEE 802.15.4-2006: 250 Kbps
  • Bluetooth 5: 2 Mbps, 1 Mbps, 500 Kbps, 125 Kbps
  • Supports DSP instructions, HW accelerated Floating Point Unit (FPU) calculations
  • ARM TrustZone CryptoCell-310 Cryptographic and security module
  • Up to +8 dBm TX power (down to -20 dBm in 4 dB steps)
  • NFC-A tag
  • On-board additional 2MB SPI flash
  • 20 mixed signal GPIO (6 x Analog, 8 x PWM), UART, I2C, SPI
  • Micro USB 2.0 full speed (12 Mbps)
  • Integrated Li-Po charging and battery connector
  • JTAG (SWD) Connector
  • RGB status LED
  • Reset and Mode buttons
  • On-board PCB antenna
  • U.FL connector for external antenna
  • FCC, CE, and IC certified
  • RoHS-compliant (lead-free)
  • Dimension: 50.8x22.8x15.3mm/2.0x0.90x0.60”
  • Weight: 7.3g
 
Pin Description
Li+ Internally connected to the positive terminal of the LiPo battery connector.
VUSB Internally connected to the USB (+ve) supply.
3V3 Output of the on-board 3.3V regulator.
GND System ground pin.
EN Device enable pin is internally pulled-up. To disable the device, connect this pin to GND.
RST Active-low system reset input. This pin is internally pulled-up.
MD Internally connected to the MODE button. The MODE function is active-low.
RX Primarily used as UART RX, but can also be used as a digital GPIO.
TX Primarily used as UART TX, but can also be used as a digital GPIO.
SDA Primarily used as data pin for I2C, but can also be used as a digital GPIO.
SCL Primarily used as clock pin for I2C, but can also be used as a digital GPIO.
MO, MI, SCK SPI interface pins, but can also be used as digital GPIO.
D2-D8 Generic GPIO pins. D2-D8 are PWM-able.
A0-A5 Analog input pins that can also act as standard digital GPIO. A0-A5 are PWM-able.
D4 TX for Serial2. Can be used as GPIO if not using Serial2.
D5 RX for Serial2. Can be used as GPIO if not using Serial2.
D6 CTS for Serial2. Can be used as GPIO if not using Serial2.
D8 RTS for Serial2. Can be used as GPIO if not using Serial2.
 
Applications:
  • Smart Home Automation: Control and monitor home devices like lights, security systems, and climate control systems using mesh networking and Bluetooth communication.
  • Sensor Networks: Ideal for creating distributed sensor networks for environmental monitoring, agriculture, or industrial systems, where multiple sensors communicate via mesh to relay data.
  • Wearable Devices: With its small footprint, low-power operation, and Bluetooth support, the Xenon is great for developing health-monitoring and fitness-tracking wearables.
  • Industrial IoT: Use in industrial monitoring systems for tracking machinery performance, energy consumption, and predictive maintenance through the mesh network, ensuring reliable communication across large spaces.
  • Portable IoT Devices: Integrated Li-Po battery support and charging make it suitable for mobile and portable applications like asset tracking, field monitoring, and logistics systems.
  • Building Automation: Create systems for smart buildings, including automated lighting, HVAC, and security, where multiple devices communicate seamlessly via mesh networks.
  • Remote Monitoring Systems: Deploy in remote locations for real-time monitoring of environmental data, weather stations, or wildlife tracking, where the mesh network ensures connectivity across distant devices.
  • Robotics: Leverage the GPIOs and mesh capabilities to build and control robots, especially in collaborative or swarm robotics projects, where multiple units work together.
  • Smart Cities: Use for street lighting control, public safety systems, and urban environmental monitoring, leveraging its mesh networking to connect large-scale, city-wide IoT systems.
  • Prototyping IoT Solutions: The board’s flexibility and Feather compatibility make it excellent for rapid prototyping of new IoT devices, allowing developers to easily integrate sensors and peripherals.
 

DOCUMENTS

 

Kit Contents

  • 1 x Xenon IoT Development Board
  • 1 x Mini Breadboard
  • 1 x USB Cable
  • 2 x 220Ω Resistors
  • 1 x Red LED
  • 1 x Photodiode