Home Shop About Us Contact Us
|
Electronics

ESP32 C6 Beetle Mini Development Board (Supports BLE, Battery Charging)

AED 34.95

Low stock
1

Description

The Beetle ESP32-C6 is a compact Arduino-compatible development board designed for low-power IoT applications. Based on the ESP32-C6 chip, it supports multiple communication protocols including Wi-Fi 6, Bluetooth 5, Zigbee 3.0, and Thread 1.3. Its compact size (25x20.5mm) makes it ideal for integration into small devices. The board includes lithium battery charging management, making it suitable for wearable applications and other portable projects.

 

Features

  • Ultra-Compact Size: Measuring only 25x20.5mm, comparable to the size of a coin, making it highly portable and suitable for small-scale projects.
  • Multiple Communication Protocols: Supports Wi-Fi 6 for efficient, low-latency connections, as well as BLE, Zigbee, and Thread, enhancing its versatility in IoT networks.
  • Integrated Lithium Battery Charging: Built-in battery management allows for easy charging and voltage monitoring, ensuring continuous operation and safety.
  • Low Power Consumption: Features deep sleep mode with a current draw of only 14uA, significantly extending battery life.
  • Rich I/O Options: Provides 13 GPIO ports, supporting various interfaces including digital I/O, PWM, SPI, UART, I2C, and ADC, offering flexibility for different applications.
  • Processor: Equipped with a high-performance 160MHz RISC-V 32-bit processor, enabling efficient handling of multiple tasks.

 

Specifications

  • Basic Parameters:

    • Operating Voltage: 3.3V
    • Type-C Input Voltage: 5V DC
    • VIN Input Voltage: 5V DC
    • Max Charging Current: 0.5A
    • Sleep Current: 14uA (in deep sleep mode, powered by battery)
    • Operating Temperature: -10~60℃
    • Dimensions: 25x20.5mm (0.98x0.81”)

  • Hardware Information:

    • Processor: RISC-V single-core processor
    • Main Frequency: 160 MHz
    • SRAM: 512KB
    • ROM: 320KB
    • Flash: 4MB
    • RTC SRAM: 16KB
    • USB: USB 2.0 CDC

  • WIFI:

    • Protocol: IEEE 802.11b/g/n, IEEE 802.11ax (20 MHz-only non-AP mode)
    • Bandwidth: 20 MHz and 40 MHz at 2.4 GHz band
    • Mode: Station, SoftAP, SoftAP+Station combined mode
    • Frequency: 2.4GHz
    • Frame Aggregation: TX/RX A-MPDU, TX/RX A-MSDU

  • Bluetooth:

    • Protocol: Bluetooth 5, Bluetooth mesh
    • Data Rate: 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps

  • IEEE 802.15.4:

    • Compatible with IEEE 802.15.4-2015 protocol
    • Frequency band: 2.4GHz
    • Data rate: 250Kbps
    • Supports Thread 1.3 and Zigbee 3.0

  • Ports:

    • Digital I/O: 13
    • LED PWM: 6 Channels
    • SPI: 1
    • UART: 3 (including 1 LP UART)
    • I2C: 2 (including 1 LP I2C)
    • I2S: 1
    • IR Transceiver: 5 transmit channels, 5 receive channels
    • ADC: 12-bit SAR, 7 Channels
    • DMA Controller: 3 transmit channels, 3 receive channels

 

Pinout:

Pin Definition Description
Power   Power-related pins
VIN 5V DC Power input pin that accepts 5V DC to power the board.
3V3 3.3V output Provides a stable 3.3V output for powering other components.
GND Ground Common ground pin for electrical circuits.
GPIO   General Purpose Input/Output pins
GPIO ESP32 default Default GPIO numbers as defined by the ESP32-C6.
Arduino Beetle mapping Corresponding GPIO numbers mapped in the Arduino environment for the Beetle ESP32-C6.
ADC   Analog-to-Digital Converter pins
ADC ESP32 default Default ADC pins for analog-to-digital conversion on the ESP32-C6.
I2C   Inter-Integrated Circuit (I2C) interface pins
Beetle I2C Arduino mapping I2C pins mapping in the Arduino environment specific to the Beetle ESP32-C6.
LP_SDA/SCL Low power I2C Low power I2C pins, used for energy-efficient communication.
UART   Universal Asynchronous Receiver/Transmitter (UART) interface pins
LP_TX/RX Low power UART Low power UART pins, suitable for low energy communication needs.
SPI   Serial Peripheral Interface pins
SPI Arduino mapping SPI pins mapping in the Arduino environment specific to the Beetle ESP32-C6.
SDIO   Secure Digital Input Output pins
SDIO ESP32 default Default SDIO pins on the ESP32-C6, used for interfacing with SD cards and other SDIO devices.
JTAG   Joint Test Action Group (JTAG) pins
JTAG Debug interface Pins us

 

Beetle ESP32 C6 Mini Development Board for Wireless Smart Wearable Device (Supports BLE, Battery Charging) - แท้จาก DFRobot - Arduino, Raspberry Pi, NodeMCU, IoT, Nvidia, Lora, AI, Machine Learning, Teensy, Lidar :

 

Applications

  • Electronic Badge: Ideal for wearable identification devices.
  • Backpack Charm: Can be used in small decorative or functional backpack accessories.
  • Pet Tracker: Suitable for lightweight, low-power pet tracking devices.
  • Electronic Watch: Perfect for compact wearable tech like smartwatches.
  • Smart Button: Useful for interactive buttons in smart home systems.
  • Smart Lighting: Enables intelligent control of lighting systems in homes and buildings.
  • Human-Interactive Devices: Applicable in devices that require human interaction and presence detection.

 

Documents:

 

Package Includes:

  • Beetle ESP32 C6 Mini Development Board x1
  • 10pin-2.54mm Pin Header x2