Out Of Stock
Description
The Raspberry Pi GlobalConnect SIM7000G NB-IoT/Cat-M/EDGE/GPRS HAT is a powerful telecommunication module specifically designed for use with the Raspberry Pi. This advanced HAT supports global bands of NB-IoT, Cat-M, and GPRS, as well as GNSS positioning functions. It is small in size, low delay, and wide coverage makes it ideal for IoT applications such as intelligent instruments, asset tracking, remote monitoring, e-health, and more.
The HAT is equipped with a standard Raspberry Pi 40PIN GPIO extension header, making it compatible with all Raspberry Pi series boards. It supports a wide range of communication protocols such as TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail, etc. It also supports GNSS positioning (GPS, BeiDou, GLONASS) and an onboard USB interface, to test AT Commands, get GPS positioning data, and more. Additionally, it has breakout UART control pins, to connect with host boards like Arduino/STM32. It has an onboard voltage translator, 3.3V by default, and allows it to be switched to 5V via 0Ω resistor. SIM card slot, compatible with both normal SIM cards and NB-IoT-specific cards.
The HAT is equipped with 2x LED indicators, which makes it easy to monitor the working status. Baudrate: 300bps~3686400bps (115200bps by default). It's Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands). It also supports the SIM application toolkit: SAT Class 3, GSM 11.14 Release 98, USAT. It also comes with development resources and a manual (examples for Raspberry Pi/Arduino/STM32) which makes it easy to set up and use. This HAT is the perfect solution for anyone looking to add telecommunication capabilities to their Raspberry Pi projects.
Package Includes:
- SIM7000G NB-IoT HAT x1
- GSM Antenna x1
- GPS External Antenna (B) x1
- USB-A to Micro-B cable x1
- Standoffs pack x1
- The HAT is compatible with all Raspberry Pi series boards, thanks to its standard Raspberry Pi 40PIN GPIO extension header.
- It supports a wide range of communication protocols such as TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail, etc.
- It also supports GNSS positioning (GPS, BeiDou, GLONASS)
- The HAT comes with an onboard USB interface that allows you to test AT Commands, get GPS positioning data, and more.
- It has breakout UART control pins, to connect with host boards like Arduino/STM32.
- The HAT has an onboard voltage translator, 3.3V by default, which allows being switched to 5V via 0Ω resistor.
- It has a SIM card slot, compatible with both normal SIM cards and NB-IoT-specific cards.
- 2x LED indicators, easy to monitor the working status.
- Baudrate: 300bps~3686400bps (115200bps by default)
- Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)
- Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 98, USAT
- Comes with development resources and a manual (examples for Raspberry Pi/Arduino/STM32) which makes it easy to set up and use.
Specifications:
| NB-IOT / CAT-M / 2G | |
|---|---|
| Frequency bands | NB-IoT: B1, B2, B3, B4, B5, B8, B12, B13, B17, B18, B19, B20, B25, B26, B28 |
| Cat-M: B1, B2, B3, B4, B5, B8, B12, B13, B17, B18, B19, B20, B25, B26, B28, B39 | |
| GPRS/EDGE: 850, 900, 1800, 1900MHz | |
| Data rate | NB-IoT: 34(DL)/66(UL) |
| Cat-M: 300(DL)/375(UL) | |
| EDGE: 236.8(DL)/236.8(UL) | |
| GPRS: 85.6(DL)/85.6(UL) | |
| SIM card support | NB-IoT: NB Specific (Not Included) |
| Cat-M/GPRS/EDGE: Normal SIM (Not Included) | |
| Applicable region | Global |
| GNSS | |
| Satellite systems | GPS, BeiDou, GLONASS |
| Receiver type | 16-channel |
| C/A Code | |
| Sensitivity | Tracking: -162 dBm (GPS) / -157 dBm (GLONASS) / TBD (BD) |
| Cold starts: -148 dBm | |
| Time-To-First-Fix | Cold starts: <35s |
| Hot starts: <1s | |
| Accuracy | Position: <2.5m CEP |
| OTHER | |
| Power supply | 5V |
| Operating voltage | 5V / 3.3V (3.3V by default) |
| Sleep Mode Current | 1.2mA (@DRX=2.56s) |
| Power Save Mode Current | 9uA |
| Operating temperature | -40°C ~ 85°C |
| Storage temperature | -45°C ~ 90°C |
| Dimensions | 30.2mm x 65mm |
Pinout:
| Pin | Description |
|---|---|
| 1 | SIM7000G |
| 2 | SPX29302 power chip |
| 3 | RT9193-33 power chip |
| 4 | Raspberry Pi GPIO header for connecting with Raspberry Pi |
| 5 | USB interface for testing AT Commands, getting GPS positioning data, etc. |
| 6 | SIM7000G control interface for connecting with host boards like Arduino/STM32 |
| 7 | SIM card slot supports 1.8V/3V SIM card |
| 8 | GNSS antenna connector |
| 9 | LTE antenna connector |
| 10 | Network status indicator |
| 11 | Power indicator |
| 12 | Operating voltage selection jumper, configured via 0Ω resistor jumper: A: set operating voltage as 5V, B: set operating voltage as 3.3V (default) |
| 13 | DTR configuration jumper, configured via 0Ω resistor jumper: A: DTR is controlled by the Raspberry Pi P26 pin, B: NC (default) |
| 14 | PWR configuration jumper, configured via 0Ω resistor jumper: A: startup/shutdown by the Raspberry Pi P4 pin, B: auto startup on power-up (default) |
