Battery Protection for Lithium ion 18650 3.7V 3A BMS MOS 1 Slot

AED 3.00



Battery Protection for Lithium-ion 18650 3.7V 3A BMS MOS 1 Slots

Long-lasting discharge current: 3A
Single-cell consumption of battery (self-consumption): ≤3uA
Charging voltage: 3.7V
Charging current: 3A
Overcharge detection voltage: 3.7 ±. 05 V
Overcharge protection delay: I P.
Overcharge release voltage: 3.7 ±. 05 V
Over-discharge detection voltage: 2.0-2.1V
Over-discharge detection delay: lo0mS
About the discharge release voltage: 2.3 ± 1V


1. Before installing the protection board, the battery should be matched well (the voltage difference between each battery should not be 0.05V, the internal resistance difference is not more than 5mQ, the tolerance is less than 30mAh), the smaller the Battery voltage difference, the better the protection board will work ..
2. The batteries are connected in parallel and then connected in series, and the welding is correct (18650 battery nickel spot welding, other batteries are soldered), do not screw, easy to burn the protection board IC.
3. If there is an old battery change board, please pay attention: please confirm the battery is normal before buying?
4. When installing, use a multimeter to check that the voltage of each string is the same? The power failures with a difference of more than 1.0V are: running not far, starting and turning off, charging time is short, basically the battery core problem is longer. The failure of the protection board is as follows: the battery cannot be charged, and the battery has a voltage and cannot be discharged.

Package include:
1x1S Battery Protection for Lithium ion 18650 3.7V 3A BMS 1 Slots