Motor Driver Module L298p Pwm Speed Controller Dual High-power H-bridge With Bluetooth Interface

AED 71.40



L298P DC motor driver uses high-power motor driver chip L298P, can directly drive 2 straight
Current motor, drive current up to 2 A, motor output uses 8 high-speed Schottky diodes as protection. The circuit wiring is reasonable and uniform
With patch panels, the laminate design can be plugged directly.
L298P DC motor drives have P W M speed regulators. The motor supply can use the VI IN input or the terminal input on the driver, using jumper switching.
Technical Specifications:
1. Logical partial input voltage vd:5v
2. Drive part input voltage Vs:vin input 6.5~12v,pwrin input 4.8~35v
3. The logic part works the current Iss:<36ma
4. Drive part of the working current io:<2a
5. Maximum dissipation power: 25W (T=75℃)
6. Control signal Input Level: high level 2.3V
7. Operating Temperature: -25+130℃
8. Hardware interface: 5.0mm spacing Terminals
9. With a fixed buckle, and can be through the array access control signal
10. Drive form: Dual high power H-Bridge Drive
11. Pin Occupation: D4~d7 Direct Drive motor
12. Support PWM/PLL mode motor speed control
13. Size: 68*53mm
1. The board with L 2 9 8 P Motor Drive chip, directly with the number of the motherboard i o port (D10. D11. D12. D13), without cumbersome wiring.
2. Onboard buzzer (D4), you can set up reversing alarm ring.
3. Convenient motor interface, can be divided into two motor output.
4. Two-way Bluetooth interface, you can plug directly, no wiring.
5. D 2, D 3, D 5, D 6, D 7, D 9, D seven are not occupied digital interfaces.
6. A 0-a 56 analog interface.
7. The forward and backward steering are all led.