Out Of Stock
1
Description
The water flow sensor is designed for various applications such as water heaters, printers, automatic water machines, and flow metering equipment. It features a stainless steel ball impeller for wear resistance and an up-and-down structure stress-applied seal ring to prevent leaks. The sensor utilizes an imported Hall element and pouring sealant encapsulation to enhance durability and prevent leakage and aging. It should be installed vertically with an inclination angle not exceeding 5 degrees.
Features:
- Stainless steel ball impeller for wear resistance
- Up-and-down structure stress applied seal ring to prevent leaks
- Imported Hall element for accurate sensing
- Pouring sealant encapsulation to prevent leakage and aging
- Suitable for vertical installation with an inclination angle not exceeding 5 degrees
Specifications:
- Working range: 0.3-6L/min
- Water pressure: ≤0.8MPa
- Minimum rated working voltage: DC 4.5-5V
- Maximum working current: 15mA DC 5V
- Working voltage range: DC 5-18V
- Load capacity: ≤10mA DC 5V
- Operating temperature range: ≤80°C
- Operating humidity range: 35%-90%RH (no frost)
- Storage temperature: -25°C to +80°C
- Storage humidity: 25%-95%RH
- Size (L x W x H): Approx. 5.8 x 3.4 x 2.7cm / 2.28 x 1.34 x 1.06 inch
- Output interface diameter: Approx. outer 7mm, inner 3mm
Pinout:
Pin | Description |
---|---|
5V | Operating voltage range: DC 4.5-5V |
Signal | Output signal related to water flow rate |
GND | Ground reference for the sensor |
Package Includes:
- 1 x Water Flow Sensor Switch Meter Flowmeter