AED 198.45
1
Description
The Keyestudio Super Learning Kit is designed for Arduino enthusiasts, offering 32 projects with comprehensive tutorials that range from beginner to advanced levels. Unlike other kits, this one includes functional modules like RFID and temperature and humidity sensors. Each project is accompanied by a connection diagram and code, making learning straightforward.
Features
- Comprehensive Learning: Includes 32 projects with detailed tutorials, covering a wide range from basic to advanced concepts.
- Additional Functional Modules: Comes with RFID module, temperature and humidity sensor, and other functional modules not typically found in basic kits.
- Clear Documentation: Each project includes a connection diagram and code, facilitating easy understanding and implementation.
- Versatile Components: Includes a variety of components such as LEDs, resistors, sensors, modules (like servo motor, stepper motor, LCD), and more.
- Arduino Compatible: Fully compatible with Arduino Uno, making it suitable for both beginners and more experienced users to learn and experiment with Arduino programming and electronics.
Arduino Uno Specifications
- Microcontroller: ATmega328P
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- DC Current per I/O Pin: 20 mA
- Flash Memory: 32 KB (ATmega328P) of which 0.5 KB is used by bootloader
- SRAM: 2 KB (ATmega328P)
- EEPROM: 1 KB (ATmega328P)
- Clock Speed: 16 MHz
Package Includes
| Component | Quantity | Component | Quantity |
| KS0078 Kit with REV4 | 1 | 220Ω Resistor | 8 |
| LED - Blue | 5 | 10KΩ Resistor | 5 |
| LED - Red | 5 | 1KΩ Resistor | 5 |
| LED - Yellow | 5 | 103 Potentiometer | 1 |
| LED - RGB | 1 | Buzzer (active) | 1 |
| Large Button Switch | 4 | Buzzer (passive) | 1 |
| Ball Tilt Sensor | 2 | Photo Resistor | 3 |
| Flame Sensor | 1 | LM35 Temp Sensor | 1 |
| IC 74HC595N 16-pin DIP | 1 | 1-digit LED Module | 1 |
| 4-digit LED Module | 1 | 8x8 LED Matrix | 1 |
| 1602 LCD Display | 1 | IR Receiver | 1 |
| IR Remote Control | 1 | Servo Motor | 1 |
| Stepper Driver Module | 1 | Stepper Motor | 1 |
| Joystick Module | 1 | Relay Module | 1 |
| PIR Motion Sensor | 1 | Analog Gas Sensor | 1 |
| ADXL345 Three Axis Acceleration Module | 1 | HC-SR04 Ultrasonic Sensor | 1 |
| DS3231 Clock Module | 1 | DHT11 Temperature & Humidity Sensor | 1 |
| Soil Humidity Sensor | 1 | RC522 RFID Module | 1 |
| RFID Card | 1 | RFID Key | 1 |
| Pin Headers | 40 | 830-hole Breadboard | 1 |
| Dupont Connector Wires | 10 | Jumper Wire | 30 |
| 6-cell AA Battery Pack | 1 | USB Cable | 1 |
Projects with Links
Wiki: Link
| No. | Project Name | Description | Link |
|---|---|---|---|
| 1 | Hello World | Introduction to Arduino and basic setup. | Project 1 |
| 2 | LED Blinking | Learn to blink an LED. | Project 2 |
| 3 | PWM | Pulse Width Modulation project. | Project 3 |
| 4 | Traffic Light | Simulate a traffic light. | Project 4 |
| 5 | LED Chasing Effect | Create a chasing LED effect. | Project 5 |
| 6 | Button-Controlled LED | Control an LED with a button. | Project 6 |
| 7 | Active Buzzer | Use an active buzzer. | Project 7 |
| 8 | Passive Buzzer | Use a passive buzzer. | Project 8 |
| 9 | RGB LED | Work with an RGB LED. | Project 9 |
| 10 | Photo Resistor | Light-sensitive resistor project. | Project 10 |
| 11 | Flame Sensor | Detect flame presence. | Project 11 |
| 12 | LM35 Temperature Sensor | Measure temperature with LM35. | Project 12 |
| 13 | Tilt Switch | Detect tilt with a switch. | Project 13 |
| 14 | IR Remote Control | Control Arduino with an IR remote. | Project 14 |
| 15 | Analog Value Reading | Read analog values. | Project 15 |
| 16 | 74HC595 Chip | Use the 74HC595 shift register. | Project 16 |
| 17 | 1-digit LED Segment Display | Display numbers with a 1-digit LED. | Project 17 |
| 19 | 8x8 LED Matrix | Work with an 8x8 LED matrix. | Project 19 |
| 20 | 1602 LCD | Display text on a 1602 LCD. | Project 20 |
| 21 | Servo Control | Control a servo motor. | Project 21 |
| 22 | Stepper Motor | Use a stepper motor. | Project 22 |
| 23 | PIR Motion Sensor | Detect motion with a PIR sensor. | Project 23 |
| 24 | Analog Gas Sensor | Measure gas concentration. | Project 24 |
| 25 | ADXL345 Three Axis Acceleration | Measure acceleration with ADXL345. | Project 25 |
| 26 | HC-SR04 Ultrasonic Sensor | Measure distance with HC-SR04. | Project 26 |
| 27 | Joystick Module | Control projects with a joystick. | Project 27 |
| 28 | 5V Relay Module | Switch devices with a relay. | Project 28 |
| 29 | DS3231 Clock Module | Keep time with DS3231. | Project 29 |
| 30 | DHT11 Temperature and Humidity Sensor | Measure temperature and humidity. | Project 30 |
| 31 | Soil Humidity Sensor | Measure soil moisture. | Project 31 |
| 32 | RC522 RFID Module | Use RFID for identification. | Project 32 |