Water Level Switch Sensor for Liquid 52mm | TechMaze

AED 30.45

Low stock

1

Description

Water Level Switch Sensor for Liquid ZP4510 1M

Specifications

Model: Plastic Float Switch
Material:PP
Size: ZP4510
Wire length: 1m
Voltage: 110V(12V/24V can also use)/220V (Below 220v all can be used)
Mode: NC(Normal Closed)/NO(Normal Open)
"Normal Open" type needs to be customized, and need about 3-5 days.

100v wire color is Yellow.220V wire color is red.

Don't over voltage.

Do not test it with LED light , in the switch has a contact. Lamp load (resistance type), because its cold resistance is lower than expected resistance, it will generate high surge current at the moment of power supply, which will damage the contact! Please test with incandescent lamp without electronic circuit.

	Date scan	1A1		2A1
	Max Contact Rating	10W		50W
	Max switching voltage	100VDC		220VDC
	Max switching current	0.5A		1.5
	Max breakdown tension	220VDC		300VDC
	Max Wear Resistance	1.0A		3.0A
	Max Contact Resistance	100mΩ
	Temperature rating	-10~+85°c
	Float ball material	PP
	Flat body material	PP + GF

Size information:

①:

S: Whole Stainless Steel: SL: Stainless Steel Stell Pipe Bend Sid Mount

P: Whole PP plastic; PC: Plastic Side Mounted

SC: Stainless Steel Side Mounted

SP: Pipe "Stainless Steel", "Float Ball":PP

PS: Pipe "PP";Float Ball "Stainless Steel"

②: The length of the installed in the tank

③: Thread diameter

④:2:2 balls, 2 points | 1-2:1 ball, 2 switch points

⑤: The middle of the distance between two float balls

⑥:1A:100V 10W
| 2A:200V 50W

⑦:1.Normally Closed (NC)
| 2.Normal Open (NO)

Normally closed

1. During the drawdown period, Spring switch is connected.

2. Increase the level up, Spring switch is disconnected

Normal open

1. During the drawdown period, Spring switch is disconnected.

2. Increase the level up, Spring switch is connected.

Wire Connect Way


	Single Contact Single Line	Double Contact Three Lines	Double Contact Four Lines	Three Contact Four Lines	Three Contact Six Lines